Cherry Products

Cherry attachments are individually designed for each material handler. All Cherry products are constructed using top quality raw materials and components, finished to the highest standard and carrying a full 12-month warranty.

Key Features

  • Available with a full 12-month warranty
  • Constructed using top quality raw materials and components
  • Finished to the highest standard

About Cherry Products

Cherry Products has become the major force in this market place and continues to strive for further excellence in service and build quality with its existing range of products.

X-FORM PROFESSIONAL

Cherry Products Ltd & Eastern Attachments have been working together since 2014. In this time they have developed a range of quality products that they are proud to sell. The current range of available attachments are buckets, fork and grabs, bucket brushes, multi-purpose buckets and tipping skips. As with all of their products, Cherry aims to ensure great value, strong and efficient attachments to all of their customers.

X-FORM BUCKETS

The X-Form range of Buckets key features are strength, build quality and design. Domex steel comes in stronger, lighter and more durable than mild steel equivalents with ‘heavy-duty’ features such as heat treated wear edges, corner gussets, coastal grade two pack paint and a rolled bucket shell.

X-FORM+ BUCKETS

In partnership with Eastern Attachments, Cherry Products offer the X-Form+ range of Buckets.

X-Form+ is purposely designed for the most demanding conditions and is structurally the strongest bucket in the current market. With its 8mm shell. formed floor, integrated spill guard, reinforced side stiffeners, gussets and heavy-duty brackets.

X-FORM FORK & GRABS

The X-Form range of Power Grabs key features are strength, build quality and design. Domex steel comes in stronger, lighter and more durable than mild steel equivalents with ‘heavy-duty’ features such as heat treated wear plates, coastal grade two pack paint, high capacity rams, high-grade zinc plated pins and long tine bushes.

BUCKET BRUSHES

In partnership with Eastern Attachments, Cherry Products offer the X-Form range of Bucket Brushes.

With a galvanized body and adjustable frame Cherrys bucket, brushes fit most tractor and telehandler buckets for a quick easy yard sweeping. Hard-wearing, reverse action poly brushes offer a low cost and effective clearing solution.

X-FORM MULTI BUCKETS

The X-Form range of Multi Buckets offers strength, build quality and design. Domex steel comes in stronger, lighter and more durable than mild steel equivalents with ‘heavy-duty’ features such as heat treated wear edges, coastal grade two pack paint, high capacity rams, high-grade pins, and unbeatable clamping power. All models also come with a heat-treated reversible toe plate, domex profiled tines and removable side panels as standard.

X-FORM TIPPING SKIPS

Manufactured from high strength, low alloy 3mm steel, the X-Form tipping skip range is made up of 2 models; the auto-locking ALS-120 and the original TS-120 manual tipping model.

The Auto Locking Tipping Skip has been engineered to make the process of lifting, transporting and emptying safer, faster and more efficient by allowing the driver to remain in the cab through the whole operation. The locking mechanism automatically engages behind the heels of both forks when the skip is lifted and will only release when placed back on the ground. Designed for Telehandlers, the skip is emptied by dumping the headstock of the machine forward.

The Manual Release Tipping Skip is designed for a variety of machines from telehandlers & loaders, to masted forklifts. To empty the skip the operator simply operates a lever on the rear of the skip.

MAN PLATFORMS

Safety access platforms are classed as essential pieces of safety equipment, if any employee is expected to work at height the Cherry platforms cover the HSE PM28 Regs. There are three standard size units available with harness points and accesses gate. On the CM24D and CM24D/8 a tool tray is standard with an industry-leading load rating of 500kg and fully galvanised, both can be ordered with bracket fitment or tine fix, should both be required this can be purchased at an extra cost.

TWO MAN SAFETY ACCESS PLATFORMS

The Cherry Safety Access Platform range includes some of the most popular models on the UK agricultural market, due to their conformity with HSE regulations and heavy-duty build quality. All models come as standard with tine fixings or bracket mount, have a self-closing access gate and a full-width tool shelf. Both of the CM24D & CM24D/8 models also come with a galvanised finish as standard.

To comply with HSE regulations (PM28), the Cherry range of platforms include – complete kick boards – weldmesh back (at the headstock width) – harness points – non slip chequer plate floor – bracket mount or tine fixing – self closing access gate – full safety instructions (including stickers) & a certificate of conformity.

SMARTBOXES

The Smartbox has been engineered to provide practical/removable ballast whilst incorporating secure storage for tools and parts, the design has evolved over many years with a strong following from both customers and demo operators.

The Smartbox system also incorporates high reflective chevron markers, side, directional and work LED lights along with an option to fit CCTV cameras. The two large side cabinets have internal shelves, the doors seal and lock to keep tools and parts safe.

The Cherry Smartbox is available for any front tractor linkage. There are three models in the range; The CSBLARGE which has a 450kg unladen weight, the CSBSTANDARD which has a 400kg unladen weight and the CSBSMALL which has an unladen weight of 350kg.

As standard the boxes come with Cat 2/3 Linkage, LED lights, a lockable tool cabinet either side. Optional extras include fuel storage containers, concrete weight blocks c/w pallet tine fixings, painted or stainless steel custom nameplates and a CCTV system. If you would prefer to keep the space in the box or need to add even more weight, Cherry can also offer galvanised weight plates that bolt on to the underside of the Smartbox in 200kg increments.

FORKS

Cherry ensures that all of their fork and grabs are designed and manufactured to the highest standard by using heavy-duty materials and Solidworks design software. Their grabs are powered by high capacity hydraulic cylinders to ensure a strong clamp.

X-FORM FORK & GRABS

The X-Form range of Power Grabs key features are strength, build quality and design. Domex steel comes in stronger, lighter and more durable than mild steel equivalents with ‘heavy-duty’ features such as heat treated wear plates, coastal grade two pack paint, high capacity rams, high-grade zinc plated pins and long tine bushes.

BUCK RAKES

Designed for large horsepower tractors, the new CF05 range is built with durability in mind and proves very popular for its reliability and strength.

The large push off gate is built with a laser-cut and pressed 5mm thick sheet with 20mm thick stiffeners to ensure maximum strength, with the laser-cut slots offering great visibility. As standard the Buck Rake comes with Cat 2/3 Point Linkage, flow valve, ultra-strong S700 pushing arms, four side tines and reflective chevrons. The heavy duty design of the product allows for greater productivity, less downtime and is the perfect choice for contracting work. A choice of Hardox and KV style tines are available with a 1260mm working length.

Design features include the 8mm walled bottom box tine holder, which is supported by a full-width 25mm base plate and a further three 20mm thick bucket edge wear pads. The 25mm thick arm profiles are cut from S700 grade steel, all of the pins are high grade and zinc plated. The 38mm Ø pivot pin utilises the retaining bolt design from their HD fork and grabs.

FOLDING FORKS

Re-designed for 2018, the all-new Cherry Folding Fork takes the term ‘Heavy Duty’ to a whole new level. Hydraulic folding wings pivot on a 70mmØ pin which themselves sit within a 110mmØ bush. A closed width of 8′ provides a safe option for road transport whilst the fork opens out to 12′ or 14′ depending on the model for maximum productivity in the clamp. Sitting between the heavy-duty mounting brackets, a protection plate prevents grass from pressing into the Loading Shovels’ headstock. 1600mm long Hardox tines, full-length bucket wear edge welded to the underside and a heavy-duty profiled box section made from 20mm thick profiles complete the robust design.

TRACTOR LOADER/SKIDSTEER FORK AND GRABS

The Cherry range of fork and grabs for Loaders and Skidsteers come as standard with two high capacity hydraulic cylinders, with high-grade zinc plated pins for long working life. A wide, 910mm opening grab means the grab can be used in a variety of applications, from mucking out to moving bales. Hydraulic hoses included as standard. KV type tines are bushed into the bottom fork box.

FORKS

The Cherry Manure/Silage Fork range starts at 4′ and goes up to 8′. The fork frame is built with strength in mind with a tough box section to take one of the three tine types they offer. Cherry can supply a conus 2 bush to take either to 2 inch round tine or the Kvernaland style tapered tine. Alternatively Cherry can supply the welded in, hard-wearing, hardox style tines. As standard, the back of the fork is made with tubing, the benefit being that you can have a better view of the application.

FORKS WITH BOLT ON GRAB

The CF02 range uses Cherrys renowned base fork design with a durable box section frame and tubing back which allows the user a full view of the operation. As with all of their forks, a variety of tines can be used including Kverneland style, 2 inch round tines and Hardox style tines. The grapple on top is profile cut and works on a twin ram system. The top grab grapple is also removable, allowing the attachment to be used as a standard manure fork.

HD FORK & GRABS – FOR 2 – 3 TONNE MACHINES

The CF06 Range has been specially designed for compact telehandlers and large capacity loader tractors. It’s heavy-duty compact design will ensure reliability and maneuverability for Farmers in small areas, but will also handle other applications with ease. HD, KV style or 2 inch Ø round tines are the option in the base, whilst grab tines can either be HD or KV style. The tube style back allows excellent visibility, whilst extras include an infill middle to protect the headstock and double side tines. All of the Forks in Cherrys heavy-duty grab range include grab stops for the protection of the hydraulic cylinders and pins.

HD FORK & GRABS – FOR 3 – 4.5 TONNE MACHINES

The Cherry CF07 range of fork and grabs are designed for machines with a capacity of 3 – 4.5 tonnes. With hydraulic cylinders taken from the tough 4 in 1 bucket, and 38mm Ø cylinder and pivot pins. The standard range starts at 7′ wide and can be built up to 8′, although one-off builds are always welcomed. Cherry also offer a wide range of tine combinations to suit your needs, such as KV style, Hardox or 50mm Ø round for the fork base and Hardox or KV style for grab. All of the Forks in Cherrys heavy-duty grab range include grab stops for the protection of the hydraulic cylinders and pins.

STONE FORK

The Cherry Stone Fork gives a quick and efficient way of removing stones/rocks from cultivated land.

With a heavy-duty design and ample visibility, the Cherry Stone Fork is available in one width with KY type tines and comes as standard with a tine guard.

BUCKETS

The Cherry Products Ltd range of buckets has been well established in the agricultural industry for over 35 years.

With a wide range of buckets available, standard or bespoke builds suitable for various applications Cherry can make a bucket to suit your every need.

X-FORM BUCKETS

The X-Form range of Buckets key features are strength, build quality and design. Domex steel comes in stronger, lighter and more durable than mild steel equivalents with ‘heavy-duty’ features such as heat treated wear edges, corner gussets, coastal grade two pack paint and a rolled bucket shell.

X-FORM+ BUCKETS

In partnership with Eastern Attachments, Cherry Products offer the X-Form+ range of Buckets.

X-Form+ is purposely designed for the most demanding conditions and is structurally the strongest bucket in the current market. With its 8mm shell. formed floor, integrated spill guard, reinforced side stiffeners, gussets and heavy-duty brackets.

REHANDLING BUCKETS

Designed on over 35 years of experience, Cherrys purpose built Rehandling Buckets are manufactured to suit your machine.

Support straps 12mm thick run continuously around the bucket, integral with the attachment brackets to offer unrivaled strength and durability. These are supported by further cross-section straps underneath and on the back of the bucket. On each side, there are 12mm stiffeners. The top of the bucket is flat, enhancing your view of the application, whilst also acting as an internal spill guard.

Built to suit your machine (ensuring the best possible crowd and dump can be achieved), Cherrys rehandling buckets have a shorter floor depth for maximum tear-out force.

The Cherry Rehandling bucket range is manufactured to the highest quality from 5mm plate. This is re-enforced by the support straps, stiffeners and gusseting, meaning the crucial stress and wear points are strengthened and protected.

LOADER/SKIDSTEER BUCKETS

Designed and manufactured with strength and cost in mind, Cherrys new range of tractor loader buckets are perfect for smaller machines with up to a 2-tonne lifting capability. With widths ranging from 3’6″ to 7′ at various capacities.

GRAIN BUCKETS

Designed to crowd back level and offer the very best dump angle available, Cherrys Grain Buckets are purpose-built to suit your machine.

Support straps 12mm thick run continuously around the bucket, with further cross-section, supports underneath and on the back of the bucket. Cherrys unique side profile design (including 12mm thick side stiffeners) allows the floor-length not to be too long, thus maximising tear-out force, whilst still allowing the bucket to crowd back level.

The Cherry Grain bucket range is manufactured to the highest quality from 5mm, 6mm, 8mm or 10mm plate (depending on model). This is re-enforced by the support straps and gusseting around the bucket. For high capacity grain buckets, please refer to Cherrys X-form range.

MULTI-PURPOSE BUCKETS

The Cherry Multi-Purpose Bucket range incorporates the ever-popular grab design used in Cherrys heavy-duty fork and grabs. This includes open and close stops for the protection of the hydraulic cylinders and 38mm Ø zinc plated pins.

The grab design allows for wide opening (CB26 sizes; 1460mm. CB27 sizes; 1760mm. CB28 sizes; 2260mm) whilst also offering the long term reliability of Cherrys heavy-duty fork and grabs. Cherry offers all models with the choice of KV style or profile tines. All models also come as standard with a bolt-on, reversible toe plate and removable side panels.

X-FORM MULTI-PURPOSE BUCKETS

The X-Form range of Multi Buckets offers strength, build quality and design. Domex steel comes in stronger, lighter and more durable than mild steel equivalents with ‘heavy-duty’ features such as heat treated wear edges, coastal grade two pack paint, high capacity rams, high-grade pins, and unbeatable clamping power. All models also come with a heat-treated reversible toe plate, domex profiled tines and removable side panels as standard.

JCB TELETRUK BUCKETS

Built on the same principle designs as Cherrys standard bucket ranges, Cherrys JCB TLT range offers reliable and well-built options for a variety of applications.

LOW PROFILE/POTATO BUCKETS

The Cherry Low Profile/Potato Bucket has an extended floor-length compared to a standard rehandling bucket allowing the user to achieve a bucket load at minimum entry into the pile. This, along with the round bar edging, helps to protect against damage to the root. As standard, the bucket also comes with corner strengthening gussets and support straps that run continuously around the bucket. The brackets are set at the correct angle for your machine and welded directly on to the straps to spread the load.

DIGGING BUCKETS

The Cherry Heavy Duty Digging bucket matches the profile and shape of the Rolled Rehandling Bucket range, it is built to a much higher specification for the most demanding work.

This digging bucket is made from 6mm, has full-length side gussets as standard, 12mm thick heavy-duty side stiffeners and extra wear plates on the underside. All models come with a bolt on the reversible toe plate. Alternatively, digging teeth can be fitted upon request.

4 IN 1 BUCKETS

The Cherry 4 in 1 Bucket is built upon a heavy-duty design for use in a variety of applications.

Manufactured as standard with 3 bucket wear edges, protected heavy duty high capacity hydraulic cylinders and high-grade zinc plated pins. The Product and can be used as a Bucket, Grader, Clamp and a Digger. As standard, all models are fitted with a double bevel, bolt-on reversible toe plate. Digging teeth can be fitted upon request.

ROOT CROP BUCKETS

The Cherry Root Crop Bucket has 25mm round bars in the front and on the back. The standard spacing of these bars is 100mm centre to centre which gives 75mm gaps. Bar spacing can be adjusted to suit individual requirements. To reduce damage to the crop, a round bar is also welded to the edge of the bucket, but Cherry can supply without this, or with a level front edge, depending on your requirements. Special builds are also welcomed, such as the above images where a higher capacity was needed.

TOE TIP BUCKETS

Cherrys range of Toe Tip Buckets allow for a greater height of tip, which benefits some applications that use high side trailers for instance. The design is based upon large high capacity cylinders which enter the bucket through boxed in sections.

The Bucket itself is built with Cherrys normal strengthening designs, with the bracket frame angles tweaked for each bracket type to allow for the maximum tip to be achieved.

WASTE BUCKETS WITH CLAW

The Cherry Waste Bucket and Claw range have been designed working closely with Cherrys customers to come up with an extremely heavy-duty product that will cope with the toughest of applications.

The range offers a host of extras to ensure it’s right for your application. The grab is made with 38mm Ø high grade zinc plated pins, open & close stops and a profile design based on Cherrys heavy-duty fork & grab range. High capacity cylinders are taken from their 4 in 1 bucket and the bucket itself is based on their top-end digging bucket. With a bolt-on reversible toe plate as standard.

BAG FILLING BUCKET

The Cherry Bag Filling Buckets offer a time effective and easy way of filling, moving, stacking and loading bags. For filling material such as sand and gravel, bag hooks are slotted over the hangers on the rear of the bucket and a trap door mechanism allows the material to fall freely and acurately. The bucket design, with front wear edge, allows a full bucket load to be achieved before emptying into the bag.

BALE HANDLING

The Cherry Products range of bale handling attachments have a certified record in the industry of reliabilty and robust design. Cherry have various attachments for all tasks involving bale handling and if you have a specific idea in mind, such as a bale pattern for your flat bale grab.

SOFT HANDS GRAB

The soft hands bale grab allows round bales to be stacked conventionally or on their ends with ease. The tubular arms and heavy duty back frame combine to grab both wrapped and unwrapped bales. With the unit able to handle round bales of 800 – 1600mm diameter it covers the vast majority of possibilities.

The option to stack round bales on end offers safer stability during stacking whilst also minimising wrap damage. Pressure relief valve and check valve options also available to allow fine adjustment of grabbing pressure and added security. The unit also allows bales to be articulated from side to end, and vice versa, ideal for those awkward bales.

The soft hands bale grab comes certificated and comes supplied with brackets to suit your loader/telehandler as standard.

BALE SPIKES

All products in Cherrys Bale Spike Range are based on the same Heavy Duty principal design, with a durable box section frame, Kverneland style tines and tine bushes. Brackets are included on all models.

SIDE SQUEEZE BALE GRAB

The CHW3 side squeezes bale grab is the ultimate grab for strength, versatility and design. For use on wrapped or unwrapped bales, squares or rounds, the heavy duty design of the CHW3 will maximise productivity. The heavy wall, circular tubed arms will protect bale wrapping and ensure a secure grip throughout. By opening parallel, the CHW3 allows for easy, tight stacking and the standard spill rail means potentially two bales can be stacked at a time. All models come with brackets and a pressure relief valve as standard. The design also means round bales can be stacked on their ends with ease.

OVER ARM BALE GRAB

The CHW2 is very popular in the market place for those looking for a heavy-duty, reliable option for moving and stacking wrapped or unwrapped bales. For use on both rounds and squares, the CHW2 is designed to minimise wrap tears whilst offering a secure grip for precise stacking. A high stroke, high capacity cylinder means the grab is universal for both round and squares, no need to get out of the cab to change pivot pins! For moving 2 round bales, Cherry also offers a double arm option.

FLAT BALE GRABS

Cherrys Bale Handling range is built specifically to suit existing industry bale sizes. Cherry uses cast bale claws with a reliable, proven design for the safe holding of bales. Cherrys standard range covers the most common bale configurations, but they can manufacture bespoke units if required. If you would like any further information on their bale grab range or compatibility options, please contact your local ASM. As with every product that Cherry Products manufacture, brackets and pipework are included as standard.

BALE GRAB WITH ROLLERS

Cherrys CH30C bale grab combines the best elements of a Bale Spike and a Bale Squeeze to offer a heavy-duty, versatile attachment for a variety of applications. Using a ‘roller’ system, the grab can be used for wrapped bales, with the rollers, large flat face and domed ends to protect the bale wrapping. A single hydraulic cylinder moves the rollers into a position to cradle the bale to ensure quick and easy stacking and maneuvering. By simply removing the rollers, 2 x KV style tines make the attachment a double bale spike with the hydraulic cylinder forcing the bales together and preventing them from spinning.

PALLET FORKS

Cherrys range of pallet forks, carriages and extensions is suitable for any machine. Bespoke models are available. For example, a wider pallet carriage with longer tines to move shipping containers. Standard sizes are usually available from stock. Cherrys pallet forks are sold in pairs only.

PALLET FORK CARRIAGES

The Cherry Pallet Fork Carriage range is built specifically to be suitable for any machine with tines to match. The benefit of having a pallet fork carriage is that you can pick up and drop off your tines like any other attachment, rather than having to remove them manually.

Cherrys pallet fork carriages have a safe working load stamped onto the serial plate. The lift capacity of the machine and pallet tines must never be exceeded.

PALLET FORK TINES

Cherry offers a massive selection of pallet fork tines for most machines. These will either fit their pallet fork carriages, your existing headstock or both. Cherry can get tines rated to your specific needs, or have them specially made if you require something slightly different. As with all pallet fork attachments, the load must never exceed the SWL of the tines, the pallet fork carriage or the lift capacity of the machine.

SIDE-SHIFT CARRIAGE

The Side-Shift carriages move forks horizontally on the fork carriage and enable exact pick-up or depositing of the loads in tight spots, greatly improving the flexibility and efficiency of the pallet carriage and tines accordingly. It is suitable for various occasions for handling and stacking. They are most commonly installed on forklift trucks, it enables the forklift to move loads side to side with minimum effort.

They can be easily retofitted to an existing class 3 castleated rail (ITA) type carriage.

PALLET FORK EXTENSIONS

The Pallet fork extensions simply slide onto your existing tines and then allow a further reach. There are many types Cherry offer, but they would need to know your existing tine dimensions. As with all pallet fork attachments, the SWL of the machine, pallet fork carriage, and tines must never be exceeded.

HEADSTOCKS

Cherry Products Ltd have been manufacturing new headstocks and converting headstocks for over 25 years.

HEADSTOCK CONVERSIONS

Headstock Conversions allow you to have a machine of a certain type and pick up attachments that have another manufacturer’s bracket type. For example, if you have attachments with Pin and Cone brackets on them and you are buying a Merlo machine, Cherry can convert the new Merlo headstock so it will pick up your original pin and cone attachments.

Cherry offers many different types of headstock conversions, all headstocks are returned painted.

HEADSTOCKS

The Cherry range of direct mount replacement headstocks can be made to fit both loaders and telehandlers. The headstocks themselves fit directly onto the boom of the machine. They can be made with either Manual or Hydraulic locking pins.

ADAPTOR PLATES

As with Cherrys headstocks, they offer both manual and hydraulic options. Please contact your local ASM for more information.

IMPLEMENT MOVER

The Cherry Implement Mover is a must for most farms. The Telehandler to Implement plate fits onto your Telehandler headstock and allows it to move any implement with Three Point Linkage, ideal for moving those large, awkward items such as ploughs and other cultivation equipment.

OTHER ATTACHMENTS

Cherry is able to manufacture bespoke builds just contact your local ASM with your requirements.

BIG BAG LIFTERS

The Cherry Bag Lifter range gives a safe, quick and efficient option for moving big bags. The design allows for extra height to be gained, easy loading or unloading curtain sided lorries and avoiding roof damage. Each model is adjustable to suit all bag sizes you wish to move, meaning that bags can be stacked and stored with precision. End restraints at the end of each arm help prevent bags sliding off, and a bump bar limits bag swing.

Cherrys Hydraulic Adjustable Bag Lifter is the most versatile bag lifter in the market place. A single hydraulic cylinder allows you to adjust the arm centres from the comfort of the cab – the perfect solution if you have a mixture of 600kg and 1000kg bags.

BUCKET BRUSHES

In partnership with Eastern Attachments, Cherry Products offer the X-Form range of Bucket Brushes.

With a galvanized body and adjustable frame Cherrys bucket brushes fit most tractor and telehandler buckets for a quick easy yard sweeping. Hard-wearing, reverse action poly brushes offer a low cost and effective clearing solution.

GRAIN PUSHER

The Cherry Grain Pusher is built on an over-specification, heavy-duty design, providing many benefits throughout. A key focus of the design is the circular tube frame which reduces the number of grain traps, keeping grain in the store and not the yard. If future length is required, a bolt on extension can be added for a relatively low cost. All models come with a nylon edge (for floor and blade protection) as standard. The large 8′ wide and 8mm thick blade offers the very best products possible.

SHEAR GRABS

The Cherry Products range of Shear Grabs in partnership with AP Machinebouw ​has a successful history of more than 35 years on dairy farms using Cherrys proven concept. The range consists of 42 versions over 4 different types suitable for a variety of machinery including wheel loader, skid-steer loader, tractors with front loader and telescopic handlers.

The hardened removable V-Knives at the front guarantee tightly cut off silage which prevents heating in the feed. Cherrys machines require little maintenance and have a long life. The pivots points are complete with replaceable bronze bushes, which can be easily lubricated via grease nipples.

All models are available with either tines or a closed bucket bottom. The closed bottom is unique due to the double walled structure, which makes sure there is no feed left behind and makes cutting a silage block an easy task due to the immense strength at all key points.

The high capacity cylinders are nickel-plated prior to chroming, giving an extensive anti-corrosive protection against chrome flake and rust, also preventing damage to hydraulic seals.

PICK UP HITCHES

Cherrys double-acting Pick Up Hitch is one of the most popular items they produce. The Cherry range of hitches are rated to tow 10 tonne and lift 2 tonne.

Cherry can cover many manufacturers including Merlo, JCB Loadalls, Manitou, Scorpion, Bobcat and John Deere Forage Harvesters.

LOG GRABS

Cherrys Log Grab range consists of the below 4 models covering a host of applications and machine types:

CHLG01 – Single Arm Log Grab on an ITA Pallet Carriage style frame with Pallet Tines.

CHLG02 – Double Arm Log Grab on a Profiled Frame with fixed lower Tines.

CHLG03 – Single Arm heavy duty Log Grab with 50mm thick profiled lower tines that are built to ‘float’ to enable them to find their way into the pile.

CHLG04 – Double Arm heavy duty Log Grab with 50mm thick profiled lower tines that are built to ‘float’ to enable them to find their way into the pile.

BOX GRADER

The Box Grader is suitable for a variety of Tractor horsepowers and gives a cost effective solution to breaking up and leveling surfaces. Ideal for farm drives, tracks and the like, the ultra hard wearing reversible front tines break up the immediate surface with relative ease. From here, these height-adjustable tines can be lifted higher up which allows the rear blades to grade or level the top layer as required. Bolt-on replaceable wear runners either side of the frame complete the heavy-duty design.

TINE MOUNTED BRUSH

Suitable for Telehandlers, Loaders or Industrial Forklift Tines, the Cherry fork mounted brush offers a cost-efficient option for yard clearing. The fork slots suit a variety of fork types; up to a maximum fork section of 150 x 60mm at 683mm hole centres. Each Brush is powder coated and has interchangeable blue nylon brushes.

WOOD BINS

The Cherry Bracket Mounted Wood Bin has been purposely designed and built with end-users to give a versatile solution to loading, moving and storing wood.

SNOW PLOUGHS

Three-point linkage included on all models. All models come as standard at 2.70m (9′) which covers a 2.45m (8′) track when angled. An adjustable heavy-duty wheelset included within the price.

SNOW BLADES

Brackets or 3 point linkage included on all models. All models come as standard at 2.70m (9′) wide which covers a 2.45m (8′) track when angled. An adjustable heavy-duty wheelset included within the price.

BRACKETS

BOLT-ON BRACKETS

Cherry supply some of the industries leading manufacturers with their bolt-on brackets.

For most manufacturer types, Cherry can supply a bolt-on bracket to fit attachments. Depending on your needs, a P.O.A will be done as the bolt-on range can be quite individual.

Unlike weld-on brackets, Cherry doesn’t tend to have bolt-on brackets in stock.

WELD-ON BRACKETS

Cherry manufacture a large range of weld-on brackets, for most manufacturer types. Cherry tend to have a large stock of weld-on brackets, which can usually be despatched on the same day.

About

Cherry Products Ltd have been manufacturing agricultural material handling equipment for over 35 years and have gained the reputation of being the market leader in this specialised industry. They have developed firm links within the agricultural community and are now the preferred UK attachment and demonstration supplier for many of the industry’s leading names. It’s through their many years of experience that they can offer you the very best attachments available to meet your material handling requirements.

Cherry Products was established in 1980, with the sole aim of producing the highest quality materials handling equipment on the market at the right price. As a British company Cherrys consistent success has been maintained due to unrivaled personal service and the ability to keep pace with the constantly changing requirements and developments in agriculture and its allied industries.

Quality Design is their trademark, centred on catering for farmers’ needs. Cherry Products commit ourselves to keep the design simple and over-engineer their products for longer life and less downtime, for ultimate benefit to their customers.

Click here for more information on our agricultural range.

Click here for more updates and news about us and our products on our Facebook page.

Fill the form out below to get in touch

  • For more information on our data handling view our privacy and cookies.
  • This field is for validation purposes and should be left unchanged.
Call Email